View Single Post
  #2  
Old 01-26-2017, 10:46 AM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016, June 2020, April 2023
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 802
Default

This clay is reusable if you keep it off of the floor. I used some larger baker's trays under the area where I would scrape excess from my model. Just wad the scrapings together, rewarm to 115 degrees in a medium large toaster oven and apply as needed.

This best way is to get a relatively close shape with foam or other cheap material, then skin coat with the clay to get the exact shape you are after. Because you can add, remove and add till you like what you see the clay is ideal for developing/ creating a look.
__________________
Mike
Reply With Quote