View Single Post
  #32  
Old 06-04-2017, 10:06 PM
mastuart mastuart is offline
Member
 
Join Date: Oct 2016
Location: Mendota Il
Posts: 91
Default

Bill how much time do you have in that part above the headlight? As you know my buck stations are much further apart than yours are. I think you can now see why I filled in some of my buck to get the lines to flow. See how the strip of metal is off the back edge of your stations? On mine where I did not fill it in, I cut pieces of metal Ruffly the shape of the station but larger and clamped then on to each side of each station and fill it in with fiber glass reinforced bondo to build it up . I then sanded it to shape so the metal strip touched all the way accross each station. Then when you use your strip of metal to see the flow you get a better idea of how it will look.

Some of my parts were not working good and I was going to start over. I put them down for an hour or two or three or maybe a week. Come back and try again and things work out. I may have more time in the part this way but I learn something from it.



Mark
__________________
Mark

Last edited by mastuart; 06-04-2017 at 10:08 PM.
Reply With Quote