View Single Post
  #3  
Old 03-14-2018, 03:06 AM
metal manny metal manny is offline
Member
 
Join Date: Aug 2011
Location: Johannesburg, South Africa
Posts: 257
Default

Hi Mike

Lovely machine you have there.

I suspect that that info will be hard to come by, but there is a firm in the US which has taken over the fabrication and distribution (license) of these machines. www.pull-xmachines.com/ They might be able to help with the specs you need.

FWIW, 8 thou sounds nominal to me and don't think you need worry about this - especially as the radial play is sound.

I have P21 manual in PDF if you would need it. You're welcome to PM me.
__________________
Manny

Remember that the best of men, are only men at best.
Reply With Quote