Quote:
Originally Posted by Stretch
On a side note... and this is one that's sure to raise eyebrows: I only flux the edges of the metal and not the full width of the weld bead. I find there is more than enough flux on just the edges to facilitate a perfect weld. The advantage is that flux glare is massively reduced and you have a more even temperature distribution. Again, a nugget that was passed down to me during my apprenticeship in the 1980's.
Regards, Matt
|
Matt, that is a proper nugget and one worth remembering. Out of interest, what sort of lens do you use when oxy acetylene welding ally? I keep on seeing people recommend the ones that Kent White sells but was wondering if there is anything comparable here in the UK. Cheers.