View Single Post
  #931  
Old 06-09-2018, 09:30 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,131
Default

I removed the fuel vapor recovery canister from the CTS and installed it in the 49. It hangs on the sheet metal above the rear suspension assy. I needed to get it in there to check for clearance. Next I installed the rear suspension cradle again. It's pretty crowded in there but I can leave the parking brake actuator in its original location and the vapor canister clears the suspension by a couple inches.

Name:  1201.jpg
Views: 1522
Size:  50.9 KB

Next I started closing up the trunk floor around the suspension. I reduced the size of my pictures as requested by Adm. I think I'm in size. I just reduced the dimensions on my picture resizer

Name:  1202.jpg
Views: 1504
Size:  77.5 KB
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.

Last edited by Jack 1957; 06-09-2018 at 09:34 PM.
Reply With Quote