View Single Post
  #15  
Old 09-17-2019, 02:45 PM
Jaroslav Jaroslav is online now
MetalShaper of the Month April 2020, September 2021, November 2022
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 2,601
Default

Yes Kent. If you need to test the mold for a part, it will show you the exact shape without risk. Then you can put the tool in the crank press and speed it up. It is applicable for bending and forming on simple tools. You have the possibility to precisely reach the ram and adjust the pressure according to your current needs. Very good machine for toying.
250t is a beautiful pressure, but it already wants to produce for industry. I think we'll go half the throttle and we'll have time to look at the girls and not have to fill out the monthly time sheets. I leave it to fools and youths with a mortgage.
But I intend to produce a bottom press for sheet metal tensioning.
This will be another task.
I tried to advance to the frame today, but I didn't have a camera. So next time I'll send the results.
__________________
Jaroslav
Reply With Quote