View Single Post
Old 06-22-2018, 12:03 PM
ScooterCO ScooterCO is offline
Join Date: Mar 2013
Location: Parker, CO
Posts: 42

Trying to get these photos to show with clicking on them..

I was presented with a sheet of 5052 in the .080. A bit stiff but we will get it done.

First we made the basic pan with a depth if 1.5 inches. I was very careful setting the box break as to not get too tight on the bend and we also drilled the corners before bending.

corner relief.jpg

Last edited by Steve Hamilton; 06-26-2018 at 04:40 PM.
Reply With Quote