Vacum sand blaster
Hello Bill,
about 15 years ago in NJ there was a big push by the local tool sales people to purchase this Vac-blaster it was approx 48" high and 20" round the principle was to take the nozzle and be able to blast a small part and reclaim the sand, while it looked really good on paper, the vac was not strong enough and the blaster was a low pressure unit like in a blaster cabinet they claimed it would keep the dust down and make less on clean up, I did not purchase it people that did were not happy and I found those shops putting the units outside not to be used. Your better off getting a portable tent and go to your local sheet metal workers shop where they do structural steel work and purchase floor grating put very thick Poly sheet the kind used in concrete forms when making a vapor barrier down first put the grates on bikes to elevate the grating about 2 to 3 inch's from the ground, drive the car or put the part on the grate blast it and recycle your sand or media this will also keep the dust down in your tent. The nice thing is you can use either a pressure type blaster or just a gravity type unit
jehammer1952
__________________
John E
|