View Single Post
  #933  
Old 06-10-2018, 01:29 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,131
Default

I made a template and cut the lower right side panel from some sheet. Next, I ran it through the E wheel using a PU upper wheel to put a bend in along the upper 3 inches so the panel rolls inward to meet with the upper panel.

Name:  1203.jpg
Views: 1401
Size:  45.4 KB

Then I used the shrinker to bring the curve in so it follows the edge of the top panel, then planished with the E wheel using the steel upper wheel.


Name:  1204.jpg
Views: 1407
Size:  53.6 KB

After some fitting and trimming, I tacked the panel in and checked suspension clearance under the car. All is good so I welded it up.

Name:  1205.jpg
Views: 1502
Size:  58.2 KB

Name:  1206.jpg
Views: 1479
Size:  56.9 KB
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.
Reply With Quote