View Single Post
  #5  
Old 12-02-2019, 09:19 PM
Mr fixit Mr fixit is offline
Member
 
Join Date: Aug 2014
Location: Portland, Oregon
Posts: 226
Default

Hi Cliffrod,

Yes I'm sure you are correct about the inside and the rust. I thought that if I start with a clean box maybe it will not get any worse. The bottom cone on mine is 4 sided and actually uses a negative draft shoot into a cyclone dust collector that usually is mounted on the back of the cabinet. I'm building a seperate stand for it and the discharge filter of the blower for better floor space use and allowing me to better store it when not in use vs the collector on the back of the cabinet.

http://allmetalshaping.com/attachmen...1&d=1575339461

http://allmetalshaping.com/attachmen...1&d=1575339461

IMG_20191124_175217719.jpg

IMG_20191124_172554214.jpg


TX
Mr fixit
Chris

Last edited by galooph; 12-03-2019 at 04:35 AM.
Reply With Quote