View Single Post
  #16  
Old 12-15-2014, 10:52 AM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016, June 2020, April 2023
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 802
Default

In the last picture, if look at the car on the platform, you can see the laminated foam and the thin layer of clay. That foam is cheap, the clay is about $6/lb. It could have been done with 60lbs, but I used 100lbs because of a mistake.
__________________
Mike
Reply With Quote