View Single Post
  #6  
Old 11-08-2017, 11:53 PM
BTromblay BTromblay is offline
ADMINISTRATOR MetalShaper of the Month August 2018
 
Join Date: Oct 2015
Location: Mukwonago, Wi
Posts: 567
Default

Hi,

In addition to the comments above, I have had good luck with making a pass thru the shrinker with the part at half depth of the die. Once you make a pass at half depth, tucks will form, go back full depth to flatten the tucks.

Bill
__________________
Bill Tromblay

"A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine.
Reply With Quote