View Single Post
  #4  
Old 06-12-2018, 11:31 PM
ScooterCO ScooterCO is offline
Member
 
Join Date: Mar 2013
Location: Parker, CO
Posts: 50
Default

Thank you Bob. I am only asking about 3003 vs 5052 as that is what I have noticed others have used in other projects. I am certainly open to other alloys.
Great advice on the bend radius. I had not considered that detail. Thank you.
As to design, we haven't made any firm plans but the general design should be fairly simple. The factory plastic one is there and should be copied fairly closely. It has a two inch depth and is shrouded to fit the factory fan. I believe it currently has two mounting bolt locations on each side. We also need to accommodate two catch cans. One on each side. The opening will be cut to accommodate the new electric fan.
We are just trying to decide on the material to order.
Any other wisdom will be appreciated.
__________________
Scott
Reply With Quote