View Single Post
  #4  
Old 01-12-2017, 09:42 AM
Steve Hamilton's Avatar
Steve Hamilton Steve Hamilton is offline
ADMINISTRATOR MetalShaper of the Month Dec. '09 & May '11
 
Join Date: May 2009
Location: Fond du Lac WI.
Posts: 2,405
Default

Cody
Use the ends and cut ,paste, weld as needed. Bend up the straight sections from flat. Only need to weld sections together rather than all the long horizontal welds. A lot less distortion and metal finishing.

Steve
__________________
Steve Hamilton
Hamilton Classics
Auto Restoration & Metalshaping
Reply With Quote