David
It is a slow process about an hour a foot.As you know If you hammer on a mig weld it will crack.So you have to keep up with it on every 3/4 of a inch of weld,there is hardly any hammering
If all you have is a mig welder it will work.Not the preferred method but sometime you have do what you have to do.
I have moved on to tig know but still use the same method.
__________________
Johnny Arial
This forum is dedicated to Metal Shaping.
Please stay on topic.
Last edited by jhnarial; 07-27-2009 at 06:49 PM.
|