View Single Post
  #5  
Old 10-02-2017, 09:03 PM
berntd berntd is offline
Member
 
Join Date: Nov 2012
Location: New South Wales Australia
Posts: 102
Default

Quote:
Originally Posted by CaptonZap View Post
...Try placing a 3/8ths tube along side of the pickup, with the bottom end situated so that the air coming down the 3/8ths tube is blowing on the sand being picked up at the entrance to the pickup tube.




Hey Jerry, I am hoping someone else has already encountered this and will let me know what the problem is or if it is finger trouble from my side.

I have to admit that I do not fully understand what you suggested.
There is a hose going down tha back of the pot and that meets the left arm on a T under the pot. The T's leg goes into the pot underside and the other arm is the output. There is also a valve in the T's leg to control sand flow.

Looks like this but with anopther valve in the tube going to the mixing valve.


I only use this pot ever few months and every time I get annoyed but then it is parked again untill next time because of more pressing things.
__________________
Best regards
Bernt

Last edited by berntd; 10-02-2017 at 09:29 PM.
Reply With Quote