View Single Post
  #4  
Old 12-13-2014, 11:27 PM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016, June 2020, April 2023
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 802
Default

Using that big box allowed me to use relatively small ribs. Because the ribs are small in area I could get as many as 10 ribs per 4x8 sheet. I used 23 sheets in to build the entire buck. This method meant I could closely space the ribs and get significant detail without the trouble of building a traditional eggcrate style buck. Full length fore/aft templates, ribs fitting and slotting isnt required.
__________________
Mike
Reply With Quote