All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Business Classifieds (https://allmetalshaping.com/forumdisplay.php?f=46)
-   -   Dovetail End Mill for Power Hammer Dies (https://allmetalshaping.com/showthread.php?t=15334)

Nate Lagler 05-23-2016 09:05 AM

Dovetail End Mill for Power Hammer Dies
 
4 Attachment(s)
I have these custom cnc ground from solid 3/4" carbide at a local shop. I've used them in the past for making my own dies and also my hammer build. Over the years, I've had others purchase them through me after having seen pictures of me using them, so I decided I would publicly offer them up for sale to any other shapers that might be interested. I've tried eBay, but my profit margin is so small that the eBay fees require me to jack up the price and I'd rather be able to sell direct and save the consumer money. Currently I'm out of my stock, but if there is interest I would be willing to invest in another order. The turn around time would be 3 weeks to a month from the time I place the order. The cost would be $295 to your door.

Attachment 37467

Attachment 37468

Attachment 37470

Attachment 37469

Adair Orr 05-26-2016 11:40 AM

This would be so handy. I'm cutting my dovetails one-by-one on a little shaper. I wish I had the cash to spare.

-A

bobadame 05-26-2016 12:06 PM

You could do this with a reground OD cutter. The face ground to the correct angle and the corner radiused. It would be a stronger cutter and probably cheaper to make/modify. Hold it in a stub arbor.

jmcglynn 02-16-2018 11:28 AM

What is the included angle on these? Corner radius? Length of cut?


All times are GMT -5. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.