fenders
1 Attachment(s)
I'm slowly beginning to wrap this project up. This week end I completed the brackets to hold these fenders to the hubs. This week I should wrap up the final tweeks on the fenders then I'll write up the process.
Attachment 45277 |
Nice work on the fenders Bob!
Peter |
Looks like a fun little machine. Was there another thread some where for the rest of it?
|
I started this thread a while back. Lots of changes and detail work since then.
http://www.allmetalshaping.com/showt...I+made+a+thing |
Excellent Bob, thank you for giving me the link so I could remember what went before. :)
|
1 Attachment(s)
Here's where I'm at on this cycle car project. I still need to make an air box, a hood, a couple of Brooklands style wind screens, paint the fenders and hood and at some point, make front and rear anti roll bars. Also, need to pull the head to fix an oil leak and then finally back to my bus project
Attachment 46150 |
All times are GMT -5. The time now is 10:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.