All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Automotive Projects (https://allmetalshaping.com/forumdisplay.php?f=20)
-   -   fenders (https://allmetalshaping.com/showthread.php?t=17652)

bobadame 02-12-2018 11:26 AM

fenders
 
1 Attachment(s)
I'm slowly beginning to wrap this project up. This week end I completed the brackets to hold these fenders to the hubs. This week I should wrap up the final tweeks on the fenders then I'll write up the process.
Attachment 45277

Peter Tommasini 02-13-2018 07:13 AM

Nice work on the fenders Bob!
Peter

Gojeep 02-13-2018 08:42 PM

Looks like a fun little machine. Was there another thread some where for the rest of it?

bobadame 02-13-2018 09:25 PM

I started this thread a while back. Lots of changes and detail work since then.
http://www.allmetalshaping.com/showt...I+made+a+thing

Gojeep 02-14-2018 08:47 PM

Excellent Bob, thank you for giving me the link so I could remember what went before. :)

bobadame 03-18-2018 10:36 PM

1 Attachment(s)
Here's where I'm at on this cycle car project. I still need to make an air box, a hood, a couple of Brooklands style wind screens, paint the fenders and hood and at some point, make front and rear anti roll bars. Also, need to pull the head to fix an oil leak and then finally back to my bus project

Attachment 46150


All times are GMT -5. The time now is 09:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.