All MetalShaping

All MetalShaping (http://www.allmetalshaping.com/index.php)
-   Automotive Projects (http://www.allmetalshaping.com/forumdisplay.php?f=20)
-   -   Scrapmaker's 32 Ford Project (http://www.allmetalshaping.com/showthread.php?t=16047)

Scrap maker 11-08-2016 10:29 AM

the next project
 
4 Attachment(s)
So I'm board to death waiting for the painter on my car so I drug home a POS 32 glass body off CL. Going to use it as a pattern buck and make a steel one just because. It's a disease................Ray

Attachment 39829

Attachment 39830

Attachment 39831

Attachment 39832

Frank.de.Kleuver 11-08-2016 01:29 PM

Can't sit still, can you?

Cool project

Greetings,

Frank

bobadame 11-08-2016 02:14 PM

I want to know where you get this energy. What are you 13?

Scrap maker 11-08-2016 02:18 PM

Quote:

Originally Posted by bobadame (Post 130646)
I want to know where you get this energy. What are you 13?

I'm 58 and half stupid and half smart...................but I keep pushing through the brain freezes, Ray

Scrap maker 12-18-2016 07:20 PM

pos 32
 
4 Attachment(s)
Working on the body fixture for the 32. Had to make a exterior jig from the glass body, pull it off and make it supported from the inside on my frame fixture. Then square it up because the glass body was a bit listing to one side. Now that I know were the firewall, door jambs and trunk opening are it's a good start for some shaping. I think I will rake the front glass a bit and lean the back some??? I feel sorry for the guy that has to put the glass body together after I'm done with it :rolleyes:

Attachment 39833

Attachment 39834

Attachment 39835

Attachment 39836



.

thefrenchone 12-18-2016 11:21 PM

Hallo Ray
Thank You for the pictures . Could You make a new Building Thread from this Great Project ,that would be Great . Greetings chrischan

PatfromFrance 12-19-2016 02:24 PM

Quote:

Originally Posted by thefrenchone (Post 131679)
Hallo Ray
Thank You for the pictures . Could You make a new Building Thread from this Great Project ,that would be Great . Greetings chrischan

Hello Scrap maker
+1
I fully agree with Thefrenchone !!
I am always interested in knowing how to build a Ford 32 roadster.

123pugsy 12-19-2016 07:12 PM

Following along Ray.

Enjoying what you've done thus far.

Scrap maker 12-20-2016 06:15 PM

Thanks for who ever moved it.........I was lazy

norson 12-21-2016 09:55 PM

Ray
I'm working on a similar project that is not moving fast enough and am Looking forward to your build with the hope to gain inspiration from it.
Norm


All times are GMT -5. The time now is 02:05 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.