All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Automotive Projects (https://allmetalshaping.com/forumdisplay.php?f=20)
-   -   My little project (https://allmetalshaping.com/showthread.php?t=17320)

Turbo57 11-12-2017 12:41 PM

My little project
 
10 Attachment(s)
I have read so many amazing thread here in this forum so i have decided to show my little project i work with.
Frame and body is 1935 chevrolet master and donator is a Jaguar 1989. I have all fenders but in really bad shape. All 4 doors is not so bad but i will remove all wood in them. Have some more to do with frame but soon sheet metal work can start:)

Attachment 44060

Attachment 44061

Attachment 44062

Attachment 44063

Attachment 44064

Attachment 44065

Attachment 44066

Attachment 44067

Attachment 44068

Attachment 44069

neilb 11-22-2017 06:07 AM

you have a fair bit of work to do leif!

ScooterCO 11-22-2017 11:16 AM

Looking forward to your progress.

Kevinb71 11-22-2017 12:01 PM

i look forward to seeing how you tackle this. Thanks for sharing.

Turbo57 11-22-2017 01:53 PM

5 Attachment(s)
Ty for your comments, then i can go further with little more pictures how far i am now.Just tell me if i shall stop:rolleyes: (my camera is not so good but hope you can see the pictures).
I am little sad , this project i started after my restoring of a Mustang -66 convertible was finished 2 years ago, wish i have started this 20 year earlier.Attachment 44217

Attachment 44218

Attachment 44219

Attachment 44220

Attachment 44221Ty for y

Turbo57 02-26-2018 02:22 PM

12 Attachment(s)
After i joiner here i realized that my wheel was to weak, so i decided to take a break with the car and change all. Why not go all in:DAttachment 45708

Attachment 45709

Attachment 45710

Attachment 45711

Attachment 45712

Attachment 45713

Attachment 45714

Attachment 45715

Attachment 45716

Attachment 45717

Attachment 45718

Attachment 45719

Turbo57 02-26-2018 02:44 PM

8 Attachment(s)
Attachment 45720

Attachment 45721

Attachment 45722

Attachment 45723

Attachment 45724
Started to make some dies
Attachment 45725
First plate made
Attachment 45726

Attachment 45727
Now can i start to make my fenders:)

Turbo57 03-11-2018 04:06 AM

6 Attachment(s)
All fenders is in really bad shape so i decided to try make new ones. Started to make a wood buckAttachment 45945

Attachment 45946

Attachment 45947

Attachment 45948

Attachment 45949

Attachment 45950

Turbo57 03-11-2018 02:23 PM

1 Attachment(s)
Sadly little moment 22 here, i cant make inner part of this buck ready, i realized that i must make my floor ready first so wheelarch not will give me problem later Attachment 45952
This was not so simple as i thought for a noobie, had to make it 50 mm wider than original fender, need some grinding and hope it will fit later

metal manny 03-12-2018 01:43 AM

Keep on going Leif...

You'll get finished eventually and have more shaping confidence and knowledge than when you started.

With all that Jag power and suspension, you'll have a super smooth ride too!


All times are GMT -5. The time now is 03:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.