enfield sports cars
3 Attachment(s)
my attempt at building a clubman
enfield sports cars chris Attachment 29230 Attachment 29231 Attachment 29232 |
Cool car. I like the seats also. Any build pictures?
Frank |
Very nice Chris I like the way you did the bonnet!
Peter |
Chris, you did a very good job on this. As Peter says, "nice touch on the bonnet" and I like the Brooklands screens and the raydyot up on cowl.
|
Nice job Chris, there are a few blokes on here into these sport cars. I think Peter Tomasini has built one as well.
You should be teaching us how to do it at the VIC MM in Sept. Cheers John |
4 Attachment(s)
some updated photo of my clubman
Attachment 33090 Attachment 33091 Attachment 33092 Attachment 33093 chris |
Can tell your an aussie... nice wheels ☺
Nice work she looks good! |
4 Attachment(s)
cut some vents in the bonnet then bent with a 6 inch shifter /file/emry/scocth brite
Attachment 34189 Attachment 34190 Attachment 34191 Attachment 34192 chris |
Nice work Mr Goldsmith.
I may have asked before but cant remember is that bonnet one piece. How did you go about it if it is. In post one the buck in rear of shot is that for the guards. Jim By the way if you go into edit advanced, above the text box is a paper clip next to the smiley face, if you open it and click on all it will put your photos up. Wherever you have the cursor in the text thats where it will place the photo or photos. |
yes Jim that is the buck for the rear guards and the front ones just cut a notch out of the 90x35 timbers and tap one side over then turn around
do the other most of the bucks i see here are a piece of art themselves mine is just a bit of shity chipboard the bonnet is all one piece just bent up in the bender at work not rolled just bent little bit at a time and the photos you no i am no good at computers will have to get better chris |
All times are GMT -5. The time now is 03:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.