All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Basic questions and answers (https://allmetalshaping.com/forumdisplay.php?f=13)
-   -   Pullmax Various bits of literature (https://allmetalshaping.com/showthread.php?t=17781)

mike kleist 03-13-2018 04:44 PM

Pullmax Various bits of literature
 
10 Attachment(s)
This lot might be of use to members

mike kleist 03-13-2018 05:14 PM

Some Pullmax P21 questions and information.
 
1 Attachment(s)
I am in the process of rebuilding my Pullmax P21 and I was wondering if any members out there could tell me what the correct endfloat of the variator input shaft should be. Mine is 8 thousands of an inch, with no radial play. Is this within a normal range? There is nothing in the manual for this.


Attachment 46016


Pullmax P21 variator belt
VX 37X10X1060 OPTIBELT - Variator belt is available from spareto.co.uk £24 but with a one month wait...

Grease

A suitable modern day grease for the Pullmax 21 is apparently Castrol Spheerol EPL-2.

metal manny 03-14-2018 02:06 AM

Hi Mike

Lovely machine you have there.

I suspect that that info will be hard to come by, but there is a firm in the US which has taken over the fabrication and distribution (license) of these machines. <cite class="_Rm">www.pull-xmachines.com/</cite> They might be able to help with the specs you need.

FWIW, 8 thou sounds nominal to me and don't think you need worry about this - especially as the radial play is sound.

I have P21 manual in PDF if you would need it. You're welcome to PM me.

mike kleist 03-16-2018 03:19 PM

Hello
Thank you for the reply. I will email the company and see if they will provide the information.
Regards Mike Kleist


All times are GMT -5. The time now is 03:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.