Filler type after metal work
Hi Group,
I have a fender that I have replaced the lower 90* edge at the back of the wheel arch with a new piece, after welding in the replacement and finishing it with a hammer and dolly it has a very slight texture to it that I think I need to use a filler on to get a completely smooth finish. I've read about feather light and other fillers in books, but since I'm new to this I thought this would be a good place to ask the question. What do you use or recommend. I look forward to any comments. TX Mr fixit Chris :) |
Rage gold is what we use in our shop
|
Rage gold is what we use in our shop. but any good filler will work go to your auto paint store they will get you what you need
|
Perfect Bryan,
I will go to the shop that sold me the primer and primer surfacer. TX Mr fixit Chris :) |
All times are GMT -5. The time now is 07:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.