wire buck problem
1 Attachment(s)
Attachment 47614Attachment 47614I'm building an aluminum body using a wire buck and have just formed a couple of panels which I would like to scribe and trim for welding. My problem is that I can't fit clamps in to hold both panels at the same time. I need some way to attach one of the panels to the buck wires without getting in the way of the other panel and clamps.
I have thought of a way to make some little clamps that would clamp the buck wire to the back of the panel through a little hole. If someone already makes something like this I would like to buy some. Or if anybody has another good idea let me know. This problem has to have come up before. |
Maybe a few neodymium magnets.
|
1 Attachment(s)
Hi,
You might try an adel clamp. Attachment 47615 The clamps are available from Aircraft Spruce, you will find them on-line. You can get the clamps for a 3/16" wire, and you can cleco the clamp shut on your wire buck or use a 10-32 screw. Bill |
Drill the overlap and use Cleecos?
|
1 Attachment(s)
Thanks guys. This is probably only a problem in one man shops so I came up with this idea. I bought some little plastic hangers for attaching coax cable to things and replaced the nails with #6 screws they work well and require only a small hole.
Attachment 47721 |
All times are GMT -5. The time now is 03:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.