All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Automotive Projects (https://allmetalshaping.com/forumdisplay.php?f=20)
-   -   enfield sports cars (https://allmetalshaping.com/showthread.php?t=12071)

chris.goldsmith 08-06-2014 05:51 AM

enfield sports cars
 
3 Attachment(s)
my attempt at building a clubman
enfield sports cars
chris

Attachment 29230

Attachment 29231

Attachment 29232

Frank.de.Kleuver 08-06-2014 07:16 AM

Cool car. I like the seats also. Any build pictures?

Frank

Peter Tommasini 08-06-2014 07:37 AM

Very nice Chris I like the way you did the bonnet!
Peter

crystallographic 08-06-2014 01:08 PM

Chris, you did a very good job on this. As Peter says, "nice touch on the bonnet" and I like the Brooklands screens and the raydyot up on cowl.

Oldnek 08-07-2014 03:28 AM

Nice job Chris, there are a few blokes on here into these sport cars. I think Peter Tomasini has built one as well.
You should be teaching us how to do it at the VIC MM in Sept.

Cheers John

chris.goldsmith 05-27-2015 04:47 AM

4 Attachment(s)
some updated photo of my clubman

Attachment 33090

Attachment 33091

Attachment 33092

Attachment 33093

chris

Harry72 05-27-2015 08:23 PM

Can tell your an aussie... nice wheels ☺

Nice work she looks good!

chris.goldsmith 09-05-2015 02:52 AM

4 Attachment(s)
cut some vents in the bonnet then bent with a 6 inch shifter /file/emry/scocth brite

Attachment 34189

Attachment 34190

Attachment 34191

Attachment 34192
chris

ozi jim 09-05-2015 05:37 AM

Nice work Mr Goldsmith.

I may have asked before but cant remember is that bonnet one piece.

How did you go about it if it is.

In post one the buck in rear of shot is that for the guards.

Jim

By the way if you go into edit advanced, above the text box is a paper clip next to the smiley face, if you open it and click on all it will put your photos up.
Wherever you have the cursor in the text thats where it will place the photo or photos.

chris.goldsmith 09-05-2015 06:29 AM

yes Jim that is the buck for the rear guards and the front ones just cut a notch out of the 90x35 timbers and tap one side over then turn around
do the other most of the bucks i see here are a piece of art themselves
mine is just a bit of shity chipboard the bonnet is all one piece just bent
up in the bender at work not rolled just bent little bit at a time
and the photos you no i am no good at computers will have to get better
chris


All times are GMT -5. The time now is 03:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.