Vintage riley wings
 

Hi guys a pair of wings i made i had one good wing to copy from i will try and show the pictures i have

Attachment 48459

Attachment 48460

Attachment 48461

Attachment 48462

Attachment 48463

Attachment 48464

Attachment 48465

Attachment 48466

Attachment 48458

Nice work Carl!

thats a nice looking wing you have there. thanks for sharing

Isn't even close to what I thought I was going to see.

Nicely done, Carl! Lovely welding too, wish I could keep the HAZ that even :)

Excellent work Carl! By sheer coincidence I'm about to make complete set also!

How did you apply the centre swage after turning the sides? Do you have a lot of clearance on you bead roller? Cheers, Matt

http://i6.photobucket.com/albums/y21...535C566B69.jpg

http://i6.photobucket.com/albums/y21...8114C5757C.jpg

Looking at how you have made the sections it appears we have taken exactly the same approach. After trying to make the nearly 5 feet long Wing on my own, I concluded also that it needed to be two sections welded between the swages 👍

Here's how far I got with the first attempt before realising it really needs to be two sections if you don't have a helper to be the "tail" whilst wheeling ;)

http://i6.photobucket.com/albums/y21...F238AD7AD3.jpg

Nicely done there Carl. :)

Very nicely done Carl, thanks for sharing.

Hi matt i managed to weld the side in first then did some measureing cause the front part of the bead was bit odd on the orignal wing and i wanted it the same it just fit in bead roller was touching at some points but didnt cause any probsAttachment 48470

Attachment 48471