All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Automotive Projects (https://allmetalshaping.com/forumdisplay.php?f=20)
-   -   Kenworth big rig rear fenders (https://allmetalshaping.com/showthread.php?t=17636)

RockHillWill 02-06-2018 09:03 PM

Kenworth big rig rear fenders
 
3 Attachment(s)
My friend Jimmy Matthews was instrumental in my acquiring the Humvee and asked if I would help with rebuilding the rear fenders on his OTR KW hauler, and I was more than willing. Jimmy has become a great addition to the metal shaping community and is of great help in the early preparations for the next Redneck Roundup. He is making some VERY nice items for the door prizes and tool exchange. I made some drawings and had the fender straight sections bent and more drawings were made today and the rear sections that hold the tail lights are at the water jet place and most likely done next week. New support brackets had to be made, and other areas needed some metal shaping 'attention'. This repair included modifications to be able to make subsequent repairs 'modular' and require minimal welding. A lot of pieces were made on Jimmy's new CNC plasma cutter table.
Attachment 45167

Attachment 45168

Attachment 45169

cliffrod 02-06-2018 10:40 PM

Very cool stuff. I like seeing the wide variety of projects members do, but will say that real utilitarian pieces/projects like these are usually my favorites. It's great to see items being made by hand and put directly into daily service.

Thanks for posting, Will.

RockHillWill 02-12-2018 08:34 AM

3 Attachment(s)
A little more work got done yesterday. Started polishing the original parts to match. making the tail lights brackets soon. Some of the reasons we started to make the new fender pieces.

Attachment 45273

Attachment 45274

Attachment 45275


All times are GMT -5. The time now is 06:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.