All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   Hello from Perth (https://allmetalshaping.com/showthread.php?t=18371)

1/2 dun shed 10-02-2018 09:00 PM

Hello from Perth
 
My name is Tony.
I joined in the hope that I can improve my lack of shaping skills.
I can weld, do some machining and basic sheet metal work but to get a nice compound curve is beyond me.

regards Tony

Mark Fox 10-02-2018 11:04 PM

Hi, Tony and welcome. I think theirs a few members on here from your neck of the woods.

Gojeep 10-03-2018 04:17 AM

Welcome Tony. Plenty of good learning to be had here.

cliffrod 10-03-2018 06:22 AM

Welcome to the forum, Tony.

Peter Tommasini 10-03-2018 06:38 AM

Hi Tony welcome to the forum
Peter

1/2 dun shed 10-03-2018 09:06 AM

Thank`s for the warm welcome gentlemen.

Gojeep,
I thought I had seen the name before, then reading your thread on beadroller mods it came back to me.(the jeep in the background was the light bulb moment). I use to read about it on the OZ rodders site years ago. Great piece of work.

Tony

Gojeep 10-04-2018 03:56 AM

Quote:

Originally Posted by 1/2 dun shed (Post 149447)
Thank`s for the warm welcome gentlemen.

Gojeep,
I thought I had seen the name before, then reading your thread on beadroller mods it came back to me.(the jeep in the background was the light bulb moment). I use to read about it on the OZ rodders site years ago. Great piece of work.

Tony

Small world hey. I am one and the same. ;)

pistol 10-04-2018 11:39 PM

Welcome tony ,another person from Perth .where abouts?
Cheers Paul

1/2 dun shed 10-05-2018 12:37 AM

out in the slums, Armadale.

the hammerworks 10-06-2018 04:13 AM

welcome tony im in rockingham


All times are GMT -5. The time now is 05:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.